Cotton Flaxen Square Packing Lubricated

Specification：3～50mm Application：Use as sealing materials on pipe valve and rotary axis piston shaft,medium with water and sea water at temperature 120℃.Use as stern axis of shipping in special.

 Compressed Asbestos and Non-asbestos Jointing Sheet

Type：NY250、WNY250、NY300、WNY300、NY400、WNY400 Specification：0.5～3.0mm Application：For use as sealing materials on pipe frangs and oil or cooling system of equipments at temperature 150℃～400℃, pressure 1.5MPa～4.5MPa

P.T.F.E. Packing

Specification:4～32mm Application:It is an ideal practical product to be used as stuffing sailings for mechanical pumps and valves with weak acid,strong alkali,various organic solvents and steam as their media.

 Cotton Flaxen Square Packing Lubricated

Specification：3～50mm Application：Use as sealing materials on pipe valve and rotary axis piston shaft,medium with water and sea water at temperature 120℃.Use as stern axis of shipping in special.

 Carbon Fibre Packing

Specification：4～25mm Application：Working temperature -100℃～300℃,working pressure 27MPa.The products wear all corrosive medium except for Oxygenant,and show good thermal conductivity, and widely used for centrifugal pumps,column pumps,blenders and valves

 Flexible Graphite Packing

Specification:4～25mm Application:This is a kind of comparatively new-type sealing material,high in with standing temperature and fine in lubrication.It is the most effective product to solve inflammable medium, and replace mechanical sealing.The products are widely used for high-temperature and high pressure positions in petrochemical industry,thermal power generation and Synthetic ammonia lines etc.

 Kevlar Fiber Packing

Specification：4～25mm Materials：Kevlar Fiber impregnated with P.T.F.E.emulsion. Performance：Use at temperature －200℃～370℃,pressure 35Mpa，linear velocity 1～15m/s,PH 0～13. Application：Use as sealing materials on reciprocating pump and centrifugal pump at high pressure, such as sand slurry, tinning, paper slurry feed water pump of power stations, etc.

 Blending Fiber Packing of P.T.F.E. with Carbon Fiber

Specification：4～25mm Materials：Carbon fiber with P.T.F.E. impregnated emulsion. Performance：Use at temperature －200～280℃, working pressure 350Mpa, linear velocity 1～15m/s,PH2～12. Application：Use as sealing materials for mechanical pumps and values with corrosive chemistry, various organic solvents and ultra-low temperature fluid basicity fluid

 Compressed Asbestos and Non-asbestos Jointing Sheet

Type：XB200、WXB200、XB350、WXB350、XB450、WXB450 Specification：0.5～5.0mm及以上 Application：For use as sealing materials on pipe frangs, units with water, steam ect. medium at temperature 200℃～450℃, pressure 1.5MPa～6MPa　

 Oil-resistant Compressed Asbestos and Non-asbestos Jointing Sheet

Type：NY250、WNY250、NY300、WNY300、NY400、WNY400 Specification：0.5～3.0mm Application：For use as sealing materials on pipe frangs and oil or cooling system of equipments at temperature 150℃～400℃, pressure 1.5MPa～4.5MPa